Detail produk:
Syarat-syarat pembayaran & pengiriman:
|
Overfeeding control: | -10% to 30% | Fabric working width: | 1200mm-3600mm |
---|---|---|---|
Pin length: | 8mm | Entry rail length: | 6m/3m |
Rail type: | Non-lubricated | Cooling way: | Air cooling |
Chamber No.: | Custom-tailor | Overfeeding rate: | -10%-80% |
Cahaya Tinggi: | hot air stenter,stenter finishing machine |
Open Width Entry Heat Setting stenter , customized for various textiles , high quality
1. Virock Stenter Discription:
Virock focus on stenter design with high performance and low energy consumption. Based on this concept, the designed stenters are not only have high quality but also with features of simple structure, reliable performance and effective cost.
2. The machine characteristics:
1) Adopt frequency converter and PLC in order to satisfy different requirements. Synchronous controlling between various units, angle transducer controllers.
2)Various combination of entry and exit chain rails are supplied for different applications. Extended entry rail track up to 6 meters can be provided which can support the knitted fabric feeding device, such as the steaming device, edge gumming and pre-drying unit. The extended exit rail tracks up to 5.8 meters length can support the air-jet cooling zone, selvedge cutting and suction device, Chain cleaning device as well.
3) The upper nozzles and the lower nozzles were controlled by individual inverters, which can adjust the upper and lower wind/air speeds according to the requirements of different varieties of technology, and has more flexible means to endow the finished fabric with various styles.
4) All the width-adjusting screws are driven by an independent motor, which can adjust the width together or independently.
5) The chamber is equipped with insulating panels , thickness: 150mm , filled with high density insulating material for minimum radiation losses. Specially designed air curtain at the first and last chamber ensure minimum heat loss through escaping hot air.
3. Features:
1) Overfeed equipped with motor and gearbox.
2) Chain tension pneumatic controlled.
3) Uncurler with infrared feeler.
4. Machine advantages:
1) High quality and advanced Electrical Control system;
All the electrical control components are used international famous brand, such as Siemen/Mistubishi PLC and HMI, Mistubishi inverter, E+L selvedge tracing device and uncurler, Maxon Gas Burner etc.
2) High Efficiency Heat Exchanger or Gas burner ( Maxon, USA) was equipped, which can quickly heat up the chamber temperature to the set temperature, greatly reduced the dull time and achieve production efficiency.
3) High efficient overfeeding result can be reached.
Kontak Person: shirley